Are Wet Belts a Bad Idea?

A Summary of Wet Belts

Recently, we have become more aware of a variation of timing belts; Wet timing belts. Featured prominently inside of the Ford Ecoblue engine, wet belts seem to be causing a lot of issues within the automotive industry while still staying mostly under the radar. In the following article I have done a deepdive into this troublesome part to discover its purpose and uncover the issues that Ford was trying to solve and ultimately created.
The new Transit: EcoBlue Engine

What is a Timing Belt?

The timing belt is a part of the engine responsible for ensuring the camshafts and crankshaft pulleys are kept in sync. This is a crucial part of the engine as it ensures that the engine valves close in time with the pistons to make sure they don’t collide, causing catastrophic damage to the engine.

What is a Wet Timing Belt?

While a dry belt is usually installed on the outside of the engine, protected by a cover, the wet belt is installed inside the engine and is submerged in oil.

The intentions of the wet belt are:

  • To increase the period between maintenance; Lubrication from the oil means that it would reduce wear and friction, extending the life of the belt and reducing fuel consumption and CO2 emissions
  • To help reduce engine temperatures; Any heat generated by the timing belt would dissipate into the oil
  • To reduce noise; Any noise or vibration from the timing belt would be dampened by the oil

The first ‘belt-in-oil’ system was installed inside of European-market 1.8L Ford diesels, the 1.8 TDCi engine. Volkswagen then followed, installing them into some of their EA211 and EA288 families of engines. In 2010, Ford released their Ecoboost featuring a wet belt and the Ecoblue came out a few years later in 2016, which can be seen in a wide range of applications.

One of the largest factors that cause timing belts to fail is contamination of fluid, including oil. This is why many of us are so surprised to learn about the existence of the ‘belt-in-oil’ system. Once oil starts to get onto the timing belt it infects the rubber and weakens it until the teeth come away or it snaps, so putting these two components together in the same system seems like a recipe for disaster.

What Issues are Caused by these Wet Belts?

Originally, the wet belt aimed to solve a simple issue. Car manufacturers needed to decrease overall emissions from cars and installing a wet belt was one of the cheapest and easiest ways to do this. The wet belt offered 30% reductions to friction loss and would reduce emissions, increasing fuel economy by just over 1%. This compact and quiet belt drive was being heralded as the way of the future for the automotive industry.

Anyone who has dealt with a wet belt will know that the problems it aims to solve do not outweigh the issues that it causes.

The main issue is that any minor impurities in the oil, such as soot or crystalline, can lead to premature belt wear. This will cause material from the belt to come loose inside the oil and clog the oil sump filter, producing an oil starvation. Additionally, the brake vacuum pump can also be affected increasing the risk of an accident due to ineffective braking.

On top of this, the extra work required to change a wet belt is a lot more advanced as opposed to changing a dry belt. In order to access the belt, the chamber needs to be drained of oil and most of the engine needs to be disassembled to access it. This means that replacing the belt, or even doing routine maintenance, takes a lot more time and work than that of a dry belt.

Does my Car Have a Wet Belt?

If you drive a Ford there is a high chance that your vehicle is fitted with a wet belt. Any Ford vehicle that features an Ecoboost or Ecoblue engine will have this troublesome belt inside. The best way to tell if your car is fitted with a wet belt is to check inside the engine. If it is fitted with a standard timing belt then it will be on the outside of the engine and should be visible when observing. However, if it is fitted with a wet belt it will be on the inside of the engine and won’t be visible from the outside.

How do I get the Most Out of My Wet Belt?

Dayco, one of the leading manufacturers in wet belts, have exaggerated the point of regular and proper maintenance in order for drivers to get the most out of their timing belts. Insufficient oil levels, neglecting to carry out proper maintenance or using improper oil could have an adverse effect on the belt.

It is important to note however that most drivers are reporting their timing belts failing prematurely. While Ford is advising that the belt is replaced every 144,000 miles OR every 10 years, a lot of garages are insisting that drivers have them replaced at around 90,000 miles OR every 5 years.

There are no clear signs that a wet belt may be failing. When carrying out maintenance on a dry belt it would need to be visually inspected, as it usually won’t give any audible warning that it will break. Considering that any noise generated by the wet belt is dampened by oil, drivers will need to be reliant on other factors to tell if their belt is failing.

When the timing belt is worn the engine may have difficulty starting and can run poorly while idling and operate erratically at high speeds. Wet belts are less likely to break, however their teeth can come loose and this would lead to belt skipping and the engine becoming desynced. If the belt is weakened it may still operate, but will continue to contaminate the oil with debris.

Read More About Timing Belts

Timing Belts VS Timing Chains

Timing Belt Components and What Can Go Wrong

Interested in Setting up an Account?

See the full range of products we offer or get in touch to see what we can offer in terms of pricing and availability

Scroll to Top